Specialty metric screws for your motorcycle as well as Fuel, Lube, and Air filters for your car or truck.

Shopping cart

Click title to display cart contents.

There are no products in your shopping cart.

0 Items $0.00

Yamaha

Yamaha motorcycle stainless steel screw kits.

M8 Wellnuts

$0.95
$0.95

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Due to frequent request we're now stocking the M8 Wellnut although we can't think of a single motorcycle that needs an M8 well nut.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nut in M8:

8mm Well Nut
Overall Height: 18.30mm (0.725")
Barrel Diameter: 15.75mm (0.619")
Flange Diameter: 21.60mm (0.850")
Flange Height: 3.10mm (0.122")

Yamaha XS1100 / XJ1100 Stainless Steel Screw Kit

$55.00
$55.00

Replace the scratched, nicked, rusted, missing, or damaged stock screws with these very attractive stainless steel socket head fasteners. This is a custom hand picked highly corrosion resistant, attractive, and durable stainless steel hardware screw kit to replace many of the stock fasteners on your Yamaha XS1100 & XJ1100 motorcycles. These shiny screws will stay beautiful for the life of the motorcycle. Kit is complete, well sorted, and highly detailed with full step-by-step instructions. Makes the perfect mini project and will enhance the already good looks of your bike.

Desmoparts crew painstakingly hand picked the stainless fasteners for your machine. We pulled one stock screw at a time and replaced it with an equal stainless fastener. Documented and photographed each step to bring you a complete well sorted kit. We've been putting together stainless screw kits for select models of over 12-years.

The Yamaha XS1100 and XJ1100 stainless steel screw kit is a very high quality, well thought out, and extremely detailed kit. This very detailed and intense 211-piece screw kit contains A2-70 grade metric stainless steel designed specifically for the very classy XS1100 and Xj1100 bikes. Do not be surprised if you find higher corrosion resistant A4 hardware in our kits. The step-by-step instructions are written in plain English and are easy to follow. Our screws are Button, Cap, Low Cap, and Flat Head style requiring common Hex key tools. Self-tapping screws are all Phillips head stainless.

The XS1100 fasteners are separated into 9-zip lock bags and clearly labeled according to screw type and location. Assembly instructions correspond to bag ID. Difficulty level: medium. Buyer need only basic wrenching ability, some free shop time, and common tools. Stainless kits make a great weekend project or gift idea. Call us if you have any specific questions regarding our products or specific installation on your bike - 713/222-0832.

Kit includes screws to fit the following components:
carburetor intake manifolds and covers
handlebar and control hardware
right and left engine covers
tach and speedo mounts
brake reservoir cover
passenger grab bar
fuel tank emblems
fuel selector valve
headlight bracket
instrument panel
handlebar clamp
license plate kit
sprocket cover
anti dive valve
side reflectors
oil filter cover
mirror mount
tail light lens
starter cover
license plate
starter cover
valve cover
and much more too tedious to list

Yamaha V-Max Stainless Steel Screw Kit

$50.00
$50.00

A well thought out and extremely detailed 215-piece all Stainless Steel hardware restoration kit with clear easy to follow instructions. Kit contains Button Allen head, Cap Head Allen, and Flat head Allen in grade A2-70 stainless steel to replace stock screws on awesome and timeless Yamaha V-Max bike.

This is a hand picked exact match of the stock fasteners only duplicated in durable stainless steel. Replace the stratched, rusted or missing stock screws with these all allen head hardware

Replace fasteners on the following components: oil pan, fork emblem, mini windscreen with nylon washers, brake and clutch reservoir covers and mountings, license plate kit, most all engine cover screws, handlebar mount, radiator, side intake panel, intake manifolds, carb side covers, rear rack, cargo tray, lens, turn signals mounts, and much much more!

Photos show just a few of the stainless screws mounted on our Yamaha V-Max. Complete assembly instructions included. The fasteners are bagged and labeled separately according to screw type to make kit completion a less daunting task. Difficulty level: easy/medium. Buyer need only have some basic wrenching skills, and of course a metric allen wrench set, phillips, and a screwdriver.

M6 Wellnuts

$0.75
$0.75

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nut in M6:

6mm Well Nut
Overall Height: 16.00mm (0.630")
Barrel Diameter: 12.70mm (0.500")
Flange Diameter: 16.00mm (0.630")
Flange Height: 1.30mm (0.051")

M5 Wellnuts

$0.65
$0.65

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nuts in M5:

5mm Well Nut
Overall Height: 16.89mm (0.665")
Barrel Diameter: 9.53mm (0.375")
Flange Diameter: 14.27mm (0.562")
Flange Height: 1.02mm (0.040")

M4 Wellnuts

$0.55
$0.55

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nuts in M4:

4mm Well Nut
Overall Height: 12.67mm (0.499")
Barrel Diameter: 7.92mm (0.312")
Flange Diameter: 11.13mm (0.438")
Flange Height: 1.32mm (0.052")

Yamaha FJ1100 Stainless Steel Screw Kit

$50.00
$50.00

A total of 182-pieces of bright stainless steel hardware designed specifically to fit the Yamaha FJ1100. Kit contains Button Allen head, Cap head, Flat Head and washers in grade A2-70 and A2-80 stainless steel. We also include hardware for the engine covers. This hardware is designed as a replacement for the windscreen, brake and clutch reservoir covers, handlebar controls, license plate kit, passenger grab rail, right and left engine cover screw kit, windscreen hardware with nylon washers, instrument panel, fuel cap, front fender, shift linkage, chain guard and guide, rear brake line, kick stand safety switch, rear cowl, rear brake reservoir mount, sprocket cover, starter cover, oil filter drain, and much more on the awesome FJ1100.

Yamaha FJ1200 Stainless Steel Screw Kit

$50.00
$50.00

A total of 163 pieces of bright stainless steel fasteners to fit '89-'92 Yamaha FJ1200. Kit contains Button Allen head, Cap head, Flat Head and washers in grade A2-70 stainless steel. We also include hardware for the engine covers. This hardware is designed as a replacement for the windscreen, brake and clutch reservoir covers, handlebar controls, rear brake lever mount, license plate kit, mirror mounts, right and left engine cover screw kit, fairing hardware with nylon washers, instrument panel, fuel cap, front fender, shift linkage, chain guard and guide, rear brake line, kick stand safety switch, rear cowl, rear brake reservoir mount, sprocket cover, starter cover, oil filter drain, and much more on the awesome FJ1200.

Yamaha Banshee Stainless Steel Screw Kit

$50.00
$50.00

A total of 176 pieces of bright stainless steel fasteners to fit the Yamaha Banshee. Kit contains Button Allen head, Cap head, Flat Head and washers in grade A2-70 and A2-80 stainless steel. We also include hardware for the engine covers. This hardware is designed as a replacement for the brake reservoir and throttle housing covers, handlebar controls, rear brake master, tail light kit, right and left engine cover screw kit, all body or fairing hardware with washers and nuts, ignition panel, handle bar mounts in A2-80 grade, front fender, bumper, muffler mounts, radiator plastic, headlight mounts and much more on the awesome Banshee.

Yamaha V-Star 650/1100 Stainless Steel Screw Kit

$40.00
$40.00

A total of 93 pieces in bright stainless steel to fit all the 650 and 1100cc V-Stars. Kit contains Button Allen head, Cap head, and washers in grade A2-70 stainless steel. We also include hardware for the optional windscreen. This hardware is designed as a replacement for the windscreen, brake reservoir cover, air cleaner, side rail/fender hardware, handlebar controls, rear brake lever mount, license plate kit, both seats, turn signal mounts and much more on the awesome V-Star.

Contact Us:

Desmoparts
1138 West 20th Street
Houston, TX 77008

Phone: (713) 222-0832 Leave a message as there are just too many telemarketers to justify answering every call.

Mr Metric: Mr. Powers
Metric Manager: Jeff the Just
Metric Miser: Thomas the Tough
sales@desmoparts.com

Visit us at Houston Biodiesel

News & Updates