Specialty metric screws for your motorcycle as well as Fuel, Lube, and Air filters for your car or truck.

Shopping cart

Click title to display cart contents.

There are no products in your shopping cart.

0 Items $0.00

Kawasaki

Kawasaki motorcycle stainless steel screw kits

M8 Wellnuts

$0.95
$0.95

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Due to frequent request we're now stocking the M8 Wellnut although we can't think of a single motorcycle that needs an M8 well nut.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nut in M8:

8mm Well Nut
Overall Height: 18.30mm (0.725")
Barrel Diameter: 15.75mm (0.619")
Flange Diameter: 21.60mm (0.850")
Flange Height: 3.10mm (0.122")

M6 Wellnuts

$0.75
$0.75

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nut in M6:

6mm Well Nut
Overall Height: 16.00mm (0.630")
Barrel Diameter: 12.70mm (0.500")
Flange Diameter: 16.00mm (0.630")
Flange Height: 1.30mm (0.051")

M5 Wellnuts

$0.65
$0.65

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nuts in M5:

5mm Well Nut
Overall Height: 16.89mm (0.665")
Barrel Diameter: 9.53mm (0.375")
Flange Diameter: 14.27mm (0.562")
Flange Height: 1.02mm (0.040")

M4 Wellnuts

$0.55
$0.55

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nuts in M4:

4mm Well Nut
Overall Height: 12.67mm (0.499")
Barrel Diameter: 7.92mm (0.312")
Flange Diameter: 11.13mm (0.438")
Flange Height: 1.32mm (0.052")

Kawasaki Z1-R Stainless Steel Screw Kit

$55.00
$55.00

A HUGE well thought out 225 piece all Stainless Steel hardware restoration kit with clear easy to follow instructions. Kit contains Button Allen head, Cap Head Allen, and Flat head Allen in grade A2-70 stainless steel to replace stock screws on awesome Z1-R and Turbo motorcycles.

This is a hand picked exact match of the stock fasteners only duplicated in durable stainless steel. Replace the stratched, rusted or missing stock screws with these all allen head hardware

Replace fasteners on the following components: fairing hardware, windscreen with nylon washers, brake reservoir cover, side rails, license plate, valve covers, engine side covers, tank emblem, handlebar mount, chain guard, intake manifold, and much much more!.

Photos show just a few of the stainless screws mounted on our Kawasaki Z1-R Turbo. Complete assembly instructions included. The fasteners are bagged and labeled separately according to screw type to make kit completion a less daunting task. Difficulty level: easy/medium. Buyer need only have some basic wrenching skills, and of course a metric allen wrench set, phillips, and a screwdriver.

Kawasaki ZX-14 Ninja Stainless Steel Screw Kit

$40.00
$40.00

A well thought out 111 piece all Stainless Steel hardware restoration kit with clear easy to follow instructions. Kit contains Button Allen head, Cap Head Allen, and Flat head Allen in grade A2-70 stainless steel to replace stock screws on awesome ZX-14 Ninja superbike.

This is a hand picked exact match of the stock fasteners only duplicated in durable stainless steel. Replace the stratched, rusted or missing stock screws with these all allen head hardware

Replace fasteners on the following components: all fairing hardware with nylon washers, windscreen with nylon washers, brake and clutch reservoir covers and mountings, license plate kit, engine side covers, fuel filler, helmet lock, chain guard, lower fairing and radiator side panel fairing, and much much more! The kit contains all new fairing hardware to replace lost or broken stock hardware. We understand the bike already has nice and uniqure fairing hardware but felt a replacement kit was needed other than stock.

Photos show just a few of the stainless screws mounted on our Kawasaki ZX-14. Complete assembly instructions included. The fasteners are bagged and labeled separately according to screw type to make kit completion a less daunting task. Difficulty level: easy. Buyer need only have some basic wrenching skills, and of course a metric allen wrench set, phillips, and a screwdriver.

Kawasaki KLR650 2008 & up Stainless Steel Screw Kit

$50.00
$50.00

One of our largest stainless steel fastener kits including appropriate nylon and stainless washers of correct size. Kit even includes metric M5 and M6 rubber wellnuts to replace the split and torn stock wellnuts. Replace your worn out or corroded hardware with this highly detailed kit. This 304 or (A2-70) stainless steel is very complete and well thought out kit. It's designed as an exact or more attractive and durable replacement for all fairings, windscreen (with nylon washer), all hand controls and guards, brake reservoir cover, rear rack, exhaust hangers, front fender mount, front brake line mount, rear brake line and reservoir mount, rear chain guards and guides, radiator front trim, skid plate, fuel tank, gas cap, air box, handlebar clamps, license plate, rear brake lens, and hand guards, and much much more.

Fasteners are bagged and clearly labeled according to fastener type and location to aid in easy kit completion. Logical easy to follow step by step instructions included. Buyer need only have some motivation, basic wrenching skills, and a metric allen tool set along with some common tools to remove the stock hardware. Difficulty level: easy/medium. We encourage the use of an anti seize thread lube during assembly.

Kawasaki KLR650 thru 2007 Stainless Steel Screw Kit

$50.00
$50.00

One of our largest kits with 180-pieces including appropriate nylon and stainless washers of correct size. Replace your worn out or corroded hardware on your 2007 and earlier KLR650. This 304 or (A2-70) stainless steel is very complete and well thought out kit. It's designed as an exact or more attractive and durable replacement for all fairings, windscreen (with nylon washer), all hand controls and guards, brake reservoir cover, rear rack, all exhaust heat shields and clamps, front fender mount, front brake line mount, clutch line mount, rear brake line and reservoir mount, rear chain guards and guides, upper and lower kickstand covers, all radiator and radiator tank hardware mounts, skid plate, fuel tank, gas cap, air box, battery box, foot pegs (optional), handlebar clamps (optional), license plate, front shock boots, brake light switch, and hand guards, and much much more.

Fasteners are bagged and clearly labeled according to fastener type and location to aid in easy kit completion. Logical easy to follow step by step instructions included. Buyer need only have some motivation, basic wrenching skills, and a metric allen tool set along with some common tools to remove the stock hardware. Difficulty level: easy/medium. We encourage the use of an anti-seize thread lube during assembly.

Kawasaki KLR650 Engine Stainless Steel Screw Kit all years

$20.00
$20.00

A 41-piece A2-70 stainless steel socket cap head fastener kit for the right and left side engine cases on the older generation and newer 2008 and up KLR 650. Kit also includes screws for the oil filter cover, water pump houing, and front chain sprocket as well. The sprocket screws overlap with the full body KLR650 kit so if you buy both kits you get extra sprocket screws. A nice attractive and corrosion resistant upgrade from the stock scews.

Contact Us:

Desmoparts
1138 West 20th Street
Houston, TX 77008

Phone: (713) 222-0832 Leave a message as there are just too many telemarketers to justify answering every call.

Mr Metric: Mr. Powers
Metric Manager: Jeff the Just
Metric Miser: Thomas the Tough
sales@desmoparts.com

Visit us at Houston Biodiesel

News & Updates