Specialty metric screws for your motorcycle as well as Fuel, Lube, and Air filters for your car or truck.

Shopping cart

Click title to display cart contents.

There are no products in your shopping cart.

0 Items $0.00

Honda

Honda motorcycle stainless steel screw kits.

M8 Wellnuts

$0.95
$0.95

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Due to frequent request we're now stocking the M8 Wellnut although we can't think of a single motorcycle that needs an M8 well nut.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nut in M8:

8mm Well Nut
Overall Height: 18.30mm (0.725")
Barrel Diameter: 15.75mm (0.619")
Flange Diameter: 21.60mm (0.850")
Flange Height: 3.10mm (0.122")

M6 Wellnuts

$0.75
$0.75

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nut in M6:

6mm Well Nut
Overall Height: 16.00mm (0.630")
Barrel Diameter: 12.70mm (0.500")
Flange Diameter: 16.00mm (0.630")
Flange Height: 1.30mm (0.051")

M5 Wellnuts

$0.65
$0.65

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nuts in M5:

5mm Well Nut
Overall Height: 16.89mm (0.665")
Barrel Diameter: 9.53mm (0.375")
Flange Diameter: 14.27mm (0.562")
Flange Height: 1.02mm (0.040")

M4 Wellnuts

$0.55
$0.55

About Rubber Well-Nuts
Many European and Japanese motorcycles use rubber well nuts of 4mm, 5mm or 6mm sizes (M4, M5, or M6) to mount windscreen and fairing pieces. They are very common item on motorcycles but hard to find and usually a dealer order. Desmoparts has worked very hard to find a nearly unlimited source for quality motorcycle wellnuts. It would not hurt to have a few of these around in case your stock wellnuts give out or dry out.

Call or email us at sales at desmoparts dot com if you have any questions about the well nuts. We do have special pricing for orders over 500 units. Dealer inquiries are welcome.
713/222-0832.

Specs, Sizing, and Ordering
Each Well Nut is sold individually. We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. Your old well nuts may be distorted and torn hence making them difficult to measure. To determine if your stock well nut is a 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut.

Here are the dimensional specs on the Desmoparts well nuts in M4:

4mm Well Nut
Overall Height: 12.67mm (0.499")
Barrel Diameter: 7.92mm (0.312")
Flange Diameter: 11.13mm (0.438")
Flange Height: 1.32mm (0.052")

Honda Aero Stainless Steel Screw Kit

$40.00
$40.00

An extensive and well thought out 85 piece all Stainless Steel hardware kit with clear easy to follow instructions. Kit was modeled after a 2001 Honda Aero. The Aero kit contains Button Allen head, Cap Head Allen, and Flat head Allen in grade A2-70 stainless steel to replace many of the prominent stock screws on the Honda Aero.

This is a hand picked exact match of the stock fasteners only duplicated in durable stainless steel. Replace the stratched and nicked phillips, and allen head hardware with these attractive and durable fasteners. No more rust as these screws will stay beautiful for the life of the bike!

Replace fasteners on the following components to list just a few: brake reservoir cover, turn signal lens and mount, handlebar mount, brake and clutch lever mounts, license plate, rear brake lines and reservoir mounts, front and rear exhaust header heat shields, and muffler mount, rear seat to fender with added nylon washer protect paint, radiator, and front seat mount. More in kit but too tedious to list.

Sorry we don't have but two photos but our camera decided to die just when we finished this bike. Complete and very detailed assembly instructions included. The fasteners are bagged and labeled separately according to screw type to make kit completion a less daunting task. Difficulty level: easy. Buyer need only have some basic wrenching skills, and of course a metric allen wrench set, phillips, and a screwdriver. We encourage the use of anti-seize lubricant on all screwsbolt threading into aluminum.

Honda 929RR Stainless Steel Screw Kit

$40.00
$40.00

An extensive and well thought out 105 piece all Stainless Steel hardware kit with clear easy to follow instructions. Kit contains Button Allen head, Cap Head Allen, and Flat head Allen in grade A2-70 stainless steel to replace many of the prominent stock screws on awesome 929RR.

This is a hand picked exact match of the stock fasteners only duplicated in durable stainless steel. Replace the stratched and nicked phillips, and allen head hardware with these attractive and durable fasteners. No more black marker touch-ups on the stock bolts as these screws will stay beautiful for the life of the bike!

Replace fasteners on the following components to list just a few: brake reservoir cover, front fender reflector, engine side covers, seat, rear cowel, turn signal lens, brake and clutch lever mounts, fuel tank, and rear brake lines and reservoir mounts.

Photos show just a few of the stainless screws mounted on the 929RR. Complete assembly instructions included. The fasteners are bagged and labeled separately according to screw type to make kit completion a less daunting task. Difficulty level: easy. Buyer need only have some basic wrenching skills, and of course a metric allen wrench set, phillips, and a screwdriver. We encourage the use of Permatex anti-seize lubricant on all screws threading into aluminum.

Honda Nighthawk 750 Stainless Steel Screw Kit

$40.00
$40.00

Give your older Nighthawk 750 some new life with this extensive and well thought out 97 piece all Stainless Steel hardware kit with clear easy to follow instructions. Kit contains Button Allen head, Cap Head Allen, and Flat head Allen in grade A2-70 stainless steel to replace many of the prominent stock screws on timeless Honda Nighthawk 750 bikes, Kit is specific for Nighthawk years 1991 through 1999.

This is a hand picked exact match of the stock fasteners only duplicated in durable corrosion resistant stainless steel. Replace the stratched and nicked phillips, and allen head hardware with these attractive and durable fasteners. No more black marker touch-ups on the stock bolts as these screws will stay beautiful for the life of the bike!

Replace fasteners on the following components to list just a few: brake reservoir cover, right and left engine side covers, brake and clutch lever mounts, license plate, mirror mounts, headlight bucket, starter, alternator, sprocket, oil cooler, chain gaurd, instrument cluster, front fender, and handlebar clamps.

Photos show just a few of the stainless screws mounted on the Nighthawk. Complete assembly instructions included with the kit. You don't just get a back of bolts. The fasteners are bagged and labeled separately according to screw type to make kit completion a less daunting task. Difficulty level: easy. Buyer need only have some basic wrenching skills, and of course a metric allen wrench set, phillips, and a screwdriver. We encourage the use of anti-seize lubricant on all screws threading into aluminum.

Honda VFR750 Interceptor Stainless Steel Screw Kit

$45.00
$45.00

Long awaited VFR750 kit is an exact match for the 1994 -1997 model years. An extensive and well thought out 126 piece all Stainless Steel hardware kit with clear easy to follow instructions. Kit contains Button Allen head, Cap Head Allen, and Flat head Allen in grade A2-70 and A2-80 stainless steel to replace many of the prominent stock screws on the VFR750 Interceptor.

This is a hand picked exact match of the stock fasteners only duplicated in durable stainless steel. Replace the stratched and nicked phillips, and allen head hardware with these attractive and durable fasteners. No more black marker touch-ups on the stock bolts as these screws will stay beautiful for the life of the bike!

Replace fasteners on the following components to list just a few: brake and clutch reservoir cover, bar ends, engine side covers, turn signal lens, brake and clutch lever mounts, fuel tank, license plate, right and left engine covers, sprocket cover, seat cowl, mirror mount, slave cylinderhandlebar clip on, seat, reflectors, chain guard and guide, clutch and brake pivot nuts, and inner windscreen screws.

Photos show just a few of the stainless screws mounted on the VFR750. Complete assembly instructions included. The fasteners are bagged and labeled separately according to screw type to make kit completion a less daunting task. Difficulty level: easy. Buyer need only have some basic wrenching skills, and of course a metric allen wrench set, phillips, and a screwdriver. We encourage the use of anti-seize lubricant on all screws threading into aluminum.

Honda VTX1800 Stainless Steel Screw Kit

$45.00
$45.00

An extensive and well thought out 148 piece all Stainless Steel hardware kit with clear easy to follow instructions. Kit contains Button Allen head, Cap Head Allen, and Flat head Allen in grade A2-70 stainless steel to replace many of the prominent stock screws on awesome VTX1800.

This is a hand picked exact match of the stock fasteners only duplicated in durable stainless steel. Replace the stratched and nicked phillips, and allen head hardware with these attractive and durable fasteners. No more rust as these screws will stay beautiful for the life of the bike!

Replace fasteners on the following components to list just a few: brake reservoir cover, engine side covers, spark plug covers, turn signal lens and mount, brake and clutch lever mounts, license plate, rear brake lines and reservoir mounts, optional cobra tach, handlebar mount, fork stone guards, exhaust header heat shields and muffler mount, rear seat to fender with added nylon washer protect paint, radiator, clutch slave, and front seat mount. More in kit but too tedious to list.

Photos show just a few of the stainless screws mounted on the VTX1800. Complete and very detailed assembly instructions included. The fasteners are bagged and labeled separately according to screw type to make kit completion a less daunting task. Difficulty level: easy. Buyer need only have some basic wrenching skills, and of course a metric allen wrench set, phillips, and a screwdriver. We encourage the use of anti-seize lubricant on all screws threading into aluminum.

Honda VTR1000 Superhawk Stainless Steel Screw Kit

$45.00
$45.00

An extensive and well thought out 109 piece all Stainless Steel hardware kit with clear easy to follow instructions. Kit contains Button Allen head, Cap Head Allen, and Flat head Allen in grade A2-70 stainless steel to replace many of the prominent stock screws on awesome VTR1000 Superhawk.

This is a hand picked exact match of the stock fasteners only duplicated in durable stainless steel. Replace the stratched and nicked phillips, and allen head hardware with these attractive and durable fasteners. No more black marker touch-ups on the stock bolts as these screws will stay beautiful for the life of the bike!

Replace fasteners on the following components to list just a few: brake reservoir cover, bar ends, engine side covers, turn signal lens, brake and clutch lever mounts, fuel tank, license plate rear brake lines and reservoir mounts, mirror mounts, horn, water pump cover, and windscreen with nylon washers.

Photos show just a few of the stainless screws mounted on the Superhawk. Complete assembly instructions included. The fasteners are bagged and labeled separately according to screw type to make kit completion a less daunting task. Difficulty level: easy. Buyer need only have some basic wrenching skills, and of course a metric allen wrench set, phillips, and a screwdriver. We encourage the use of anti-seize lubricant on all screws threading into aluminum.

Contact Us:

Desmoparts
1138 West 20th Street
Houston, TX 77008

Phone: (713) 222-0832 Leave a message as there are just too many telemarketers to justify answering every call.

Mr Metric: Mr. Powers
Metric Manager: Jeff the Just
Metric Miser: Thomas the Tough
sales@desmoparts.com

Visit us at Houston Biodiesel

News & Updates